If you are not finding what you are looking for on this page, try one of the following:
- Go back to main hose selection page
- Use our hose selection chart
- Select a different hose category - see MORE HOSE PAGES in the right margin.
- Look in the margin for additional information and related products
- Fill out one of the forms on any page to get help.
Available 1-Wire Hoses
No-skive hydraulic
Up to 3,250 psi, ISO/SAE/EN rated
Reinforcement: 1 wire
Cover: Synthetic rubber
Specs: SAE 100R1 Type AT, ISO 1436-1 Type 1SN, EN 853 Type 1SN
|
No-skive hydraulic
Up to 1,000 psi, For phosphate ester base fluids
Reinforcement: 1 wire
Cover: EPDM rubber
Specs:
|
No-skive hydraulic
Up to 2,750 psi, High temprerature, MSHA accepted
Reinforcement: 1 wire
Cover: PKR rubber, MSHA accepted
Specs: SAE 100R1 Type AT
|
Marine fuel and engine hose
500 psi
Reinforcement: 1 wire
Cover: Synthetic rubber
Specs: SAE J1527 Type A, Class I, ISO 7840 if used with 26 series fittings, USCG SAE J1942
|
No-skive hydraulic
Up to 2,750 psi, Protective wire cover
Reinforcement: 1 wire
Cover: Synthetic rubber with galvanized steel wire over braid
Specs: SAE 100R1 Type AT
|
No-skive hydraulic, abrasion resistant
Up to 3,250 psi, MSHA accepted, ISO/SAE/EN rated
Reinforcement: 1 wire
Cover: Synthetic rubber, abrasion resistant, MSHA accepted
Specs: SAE 100R1 Type AT, ISO 1436-1 Type 1SN, EN 853 Type 1SN
|
No-skive hydraulic, abrasion resistant
Up to 3,250 psi, MSHA accepted, ISO/SAE/EN rated
Reinforcement: 1 wire
Cover: Synthetic rubber, abrasion resistant, MSHA accepted
Specs: SAE 100R1 Type AT, ISO 1436-1 Type 1SN, EN 853 Type 1SN
|
No-skive hydraulic
Up to 3,000 psi, MSHA accepted
Reinforcement: 1 wire
Cover: Synthetic rubber, MSHA accepted
Specs:
|
CNG and LPG
425 psi, factory made assemblies only. Contact us for more information.
Reinforcement: 1 wire
Cover: Synthetic rubber
Specs: , CGA Type III, ECE 110 Class 1
|
Air brake
Up to 3,000 psi, Cloth covered
Reinforcement: 1 wire and 1 fiber
Cover: Fiber braid
Specs: SAE 100R5 J1402 AII, D.O.T. FMVSS 106 AI-Air Brake
|
Air brake
Up to 3,000 psi, Cloth covered
Reinforcement: 1 wire and 1 fiber
Cover: Fiber braid
Specs: SAE 100R5 J1402 AII, D.O.T. FMVSS 106 AI-Air Brake
|
Air brake
Up to 2,000 psi, Cloth covered
Reinforcement: 1 wire and 1 fiber
Cover: Fiber braid
Specs: SAE J1402 AI, D.O.T. FMVSS 106 AI-Air Brake
|
Transportation
Up to 3,000 psi
Reinforcement: 1 wire and 1 fiber
Cover: Synthetic rubber, MSHA accepted
Specs: SAE 100R5
|
Air brake
Up to 2,000 psi, Cloth covered
Reinforcement: 1 wire and 1 fiber
Cover: PKR rubber
Specs: SAE J1402 AII, D.O.T. FMVSS 106A - AIR BRAKE
|
Compressed Air
Up to 500 psi
Reinforcement: 1 wire and 1 fiber
Cover: Fiber braid
Specs:
|
Liquefied Petroleum Gas
350 psi
Reinforcement: 1 wire and 1 fiber
Cover: Fiber braid
Specs: , UL 21
|
Suction & return
25 inches of Hg, Tight bend radius
Reinforcement: 1 wire and multiple fiber spiral
Cover: Synthetic rubber
Specs: SAE 100R4
|
Suction & return
28 inches of Hg, MSHA accepted
Reinforcement: 1 wire and multiple fiber spiral
Cover: Synthetic rubber, MSHA accepted
Specs: SAE 100R4
|
Suction & return, vbhigh temperature
28 inches of Hg, Tight bend radius, MSHA accepted
Reinforcement: 1 wire and multiple fiber spiral
Cover: Synthetic rubber, MSHA accepted
Specs: SAE 100R4
|
No-skive hydraulic, abrasion resistant
Constant working pressure (3,000 psi) , MSHA accepted
Reinforcement: 1 wire or 2 wire
Cover: Synthetic rubber, abrasion resistant, MSHA accepted
Specs: SAE 100R17, ISO 11237 Type R17
|
No-skive hydraulic, abrasion resistant
Constant working pressure (3,000 psi) , MSHA accepted
Reinforcement: 1 wire or 2 wire
Cover: Synthetic rubber, abrasion resistant, MSHA accepted
Specs: SAE 100R17, ISO 11237 Type R17
|
No-skive hydraulic, abrasion resistant
Twin line, Constant 3,000 psi working pressure, MSHA accepted
Reinforcement: 1 wire or 2 wire
Cover: Synthetic rubber, abrasion resistant, MSHA accepted
Specs: SAE 100R17, ISO 11237 Type R17
|