Parker P35 hydraulic hose was designed with a large-bore 2 inch size for high-pressure applications.
- Meets SAE 100R13, ISO 3862-1 Type R13 and EN 856 Type R13 specifications
- No-Skive design eliminates the need to remove the hose cover before crimping
- Approved with S6 Series fittings
- MSHA accepted cover
 |
Parker P35 Hydraulic Hose
Specifications: SAE 100R13 / ISO 3862-1 TYPE R13 / EN856 TYPE R13
Application: Petroleum base hydraulic fluids and lubricating oils
Inner Tube: Synthetic rubber
Reinforcement: Four or six sprial steel wire
Cover: Synthetic rubber, MSHA accepted
Temperature Range: -40°F to ++257°F (-40°C to +125°C)
Fittings: S6 series
|
Parker P35 Hydraulic Hose Specifications
|
Part No
|
Inside Diameter
|
Outside Diameter
|
Working Pressure
|
Min Bend Radius
|
Weight
|
Vacuum Rating
|
Hose Ends
|
|
P35
|
in
|
mm
|
in
|
mm
|
psi
|
MPa
|
in
|
mm
|
lb/ft
|
kg/m
|
in of Hg
|
kPa
|
Crimp
|
Field Attachable
|
|
P35-32
|
2
|
51
|
2.8
|
71
|
5000
|
35,0
|
25
|
630
|
5.03
|
7,48
|
-
|
|
S6
|
-
|
IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.