We wrote about the advantages of the Parker Tracking System (PTS) back in August of 2013. One of the great benefits we talk about is the ability to order a replacement hose assembly without the need to leave your shop. Today, with mandates for social distancing, the ability to order parts without physical interaction with other people is critical.Read More
BLOG | Hose & Fittings, Etc.
Our Bay Area, California stores (in San Leandro and Fremont) are open but only staffed with skeleton crew to comply with the shelter in place order at least through April 7, 2020.Read More
Hose & Fittings, Etc. is proud to become a part of the Motion & Flow Control Products, Inc. family. What does it mean for our customers? Additional services, additional products, and a whole lot more inventory!
Watch a 2-minute QuickFitTM video to see it work.
OSHA Requests Input on Proposed Changes to the Silica Standard
OSHA sent a Trade Release out on August 14, 2019, announcing that they are seeking input from industries affected by their Crystalline Silica regulations. Construction companies, rock cories and any other businesses engaged in jackhammering, cutting or braking rock, concrete, masonry and other materials containing crystalline silica are obligated to employ measures to prevent their workers from inhaling the crystalline silica dust. If you are affected by the regulation, this is your chance to have input.
Comments must be submitted by October 14, 2019. Comments and materials may be submitted electronically at http://www.regulations.gov, the Federal e-Rulemaking Portal, or by facsimile or mail. See the Federal Register notice for submission details.
You may also like to read our earlier blog about OSHA regulation, enforcement and penalties, Save Your Workers' Lungs & OSHA's Staggering Penalties for Violations of Crystalline Silica Rules.
The (corrected) OSHA trade release is provided below:Read More
Electromechanical (EM) actuating systems have been increasing in popularity for some time. They have replaced pneumatic and hydraulic systems in many light-duty applications. Today,another option (such as the Parker HAS 500) is available: a hybrid of EM and hydraulic actuation systems, which combines the best of both worlds.
Below we will compare EM and hydraulic systems and take a quick look at the new hybrid system.Read More
Last year, we wrote about OSHA's new enforcement focus on violations of crystalline silica rule, which became more stringent in 2017. Since the enforcement is ramping up, and fees associated with non-compliance automatically go up each year, we thought a re-post of our last year's blog about using the wet method suppression is relevant. Check out the video added at the end of the blog.
Parker 7084 Series Twinhammer hose conveys both air to power the jackhammer and water to spray down the work area to supress RCS. Use for compliance wtih OSHA RCS laws.
Use Conversion Kit to upgrade virtually any jackhammer to OSHA compliant tool.
|Since September 2017, OSHA has required the construction industry to comply with new regulations for respirable crystalline silica (RCS) exposure in the workplace. This new standard was enacted to protect workers from airborne silica particles that are generated by grinding, cutting, drilling, sawing and crushing materials such as stone, rock, concrete, brick and mortar. Inhalation of these particles can cause severe health issues including silicosis, lung cancer, COPD and kidney disease. In response, Parker developed the 7084 Series Twinhammer hose and a conversion kit to convert virtually any jackhammer to a tool compliant with OSHA RCS rules.
Posted by Vincent Lockwood
Corrosive environments and extreme temperatures, high or low, present challenges for everyday fittings, especially in high-pressure applications. JIC fittings in larger sizes do not provide an adequate pressure rating, and O-rings in ORFS connections are susceptible to erosion. Extreme environments require extreme solutions.Read More
Parker will discontinue 30 of its legacy hoses by next June. Of those 30 hoses 22 will become obsolete at the end of 2018, and the remaining eight will go out of production June 28, 2019. Look for the list of obsoleted hose series and suggested replacements later in this article. The GlobalCore family of hoses, of which there are six, will replace the 30 outgoing hoses. Additionally, the six hoses in the GlobalCore series use only two series of fittings – 43 and 77.
The change was a long time coming, and changing to GlobalCore should be relatively painless for users in the short run. In the long run, it will be a blessing. Here is the scoop on why you should have switched to GlobalCore a long time ago:Read More
If you are repairing or maintaining hydraulic equipment, you make and re-make connections daily. You know to use plugs and caps to plug open ports and cap disconnected hoses, in order to keep the the dirt out and oil in. This method works for most connections, but when it comes to flanges most mechanics' oil containment method is to shove a rag into the open port, and another in the end of the disconnected hose (or tube assembly).
Now, there's another option – using FlangeLock™. The FlangeLock™ allows for quick, simple sealing of open SAE Code 61, Code 62 & CAT-style hydraulic flange connections without tools. It is the ultimate spill and contamination control during disconnecting and re-connecting flange fittings.Read More