Particulate Filter | Parker P3Y Series

 P3Y-Particulate-Filter

FEATURES

  • Integral 3/4" or 1" ports
  • High efficiency particulate element
  • Excellent water removal efficiency
  • Robust, lightweight aluminum construction
  • Low minimum temperature (-40°F) with combined manual/semi-auto drain

SYMBOLS

P31-Mini-Particulate-Filter-Pulse-Drain P31-Mini-Particulate-Filter-Pulse-Drain
Manual/Semi-Auto Drain Auto Drain

Back to Global FRLs Main Page


Part Numbers


Part Number  Description

Port Size

 Flow dm3/s (scfm)

Max. Bar (psig)

Height

mm (in)

Width

mm (in)

Depth

mm (in)

P3YFA16GSCN

Combined manual / semi-auto drain

 3/4"  116  (246)
17.5 (254) 244 (9.6) 90 (3.5) 94 (3.7)
P3YFA16GSAN

Auto drain

 3/4" 116  (246)  17.5 (254) 244 (9.6) 90 (3.5) 94 (3.7) 
P3YFA18GSCN Combined manual / semi-auto drain  1" 119 (252)
17.5 (254) 244 (9.6) 90 (3.5) 94 (3.7)
P3YFA18GSAN  Auto drain 1" 119 (252) 17.5 (254) 244 (9.6)  90 (3.5)
94 (3.7)


p3y-particulate-filter-dimensions


Service Kits

Part Number Description
P3YKA00ESE 5 micron element kit
P3YKA00ESG 40 micron element kit
P3YKA00BSC Bowl kit with combined manual / semi-auto drain
P3YKA00BSA Bowl kit with auto drain

Technical Specifications

Maximum Inlet Pressure:
17.5 bar (254 psig)
Temperature Range: (Auto drain)  14°F to 140°F
  (Combined drain) -40°F to 140°F
Typical flow (5 micron element, 6.3 bar inlet pressure, 0.5 bar pressure drop): 119 dm3/s (252 scfm)
Particle Removal: 5 micron 
Bowl Capacity: 4.4 oz
Manual / semi-auto drain:
Closed at 0.8 bar (11.6 psig)
  G1/8 thread male
Auto drain powl pressure to close drain: 0.8 bar (11.6 psig)
Operating range manual override facility:
0.8 bar (11.6 psig) to 17.5 bar (254 psig)

Warning Triangle WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

Parker Air Preparation

Global Air Prep
  • Modular design allows for quick component change - no need to disconnect piping
  • Can be used without modular connectors using existing piping
Prep-Air II
  • Wide selection of sizes and options
  • Proven design, widely used

Stainless Steel FRLs

  • Suitable for most corrosive environments

Precision Regulators

  • Flows to 150 SFFM
  • Pressures to 500 PSIG

Electronic Proportional Regulators

  • All controls on the same face
  • Highly visible LED Display
  • Modular Mounting