Bite Type Tube Fittings: 90° Elbows | Parker Ferulok

All Parker Ferulok flareless fittings conform to SAE J514 specs. Parker bite type fittings for metric applications, EO & EO-2, conform to ISO 8434-1 standards. Some Ferulok fittings conform to the requirements of specification sheets MS518XX under MIL-F-18866, and others do not. Contact Motion & Flow Control Products, Inc. for conformance details.

Ferulok bite type flareless fittings are available in steel and stainless steel and can be furnished in other materials by Motion & Flow Control Products, Inc. on request.

A bite type fitting is sometimes incorrectly referred to as a compression fitting. Compression fittings are designed for use with soft tubing and are not interchangable with bite type fittings!

The Ferulok bite type fitting is a flareless fitting that consists of a body, a one-piece precision machined ferrule, and a nut. On assembly, the ferrule “bites” into the outer surface of the tube with sufficient strength to hold the tube against pressure, without significant distortion of the inside tube diameter. The ferrule also forms a pressure seal against the fitting body.

Parker EBU Union Elbow

Union Elbow

EBU

Parker WEBU Bulkhead Union Elbow

Bulkhead Union Elbow

WEBU

Parker C6BU Flareless Swivel Elbow

Flareless Swivel Elbow

C6BU

Parker C5BU SAE-ORB Flareless Elbow

SAE-ORB Flareless Elbow

C5BU

Parker CC5BU SAE-ORB Long Flareless Elbow

SAE-ORB Flareless Elbow - Long

CC5BU

Parker CBU NPTF Male Flareless Elbow

NPTF Flareless Male Elbow

CBU

Parker DBU NPTF Female Flareless Elbow

NPTF Flareless Female Elbow

DBU

  

 

Related Information

  • Thread Guide - Inch Thread
  • Thread Guide - Metric, JIS, BSPP
  • TS1000 Plating
  • Tube End Specs
  • Port End Specs

Related Information

  • Thread Guide - Inch Thread
  • Thread Guide - Metric, JIS, BSPP
  • TS1000 Plating
  • Tube End Specs
  • Port End Specs