787TC | Parker Compact Spiral 5000 PSI Hydraulic Hose

This hose has become a part of Parker Global core family. The updated information for 787 hose is here. The information below is for historical reference only.

787TC compact spiral hose can bend to half the minimum bend radius of SAE 100R13 spiral hydraulic hose.
787TC compact spiral hose takes one-third less effort to bend than SAE 100R13 hydraulic hose.
Smaller O.D. (nearly 30% smaller area of the 787TC's cross section compared to SAE 100R13 hydraulic hose) means it is easier to route the 787TC compact spiral hose in tight spaces.
Parker 787TC compact spiral hose is flex impulse tested to 2,000,000 cycles - twice the ISO 18752-DC requirement.
The maximum working pressure is constant 5000 PSI across all sizes.
787TC compact spiral hose weighs less than SAE spiral hydraulic hose.

Parker 787TC Compact Spiral Tough Cover Hydraulic Hose

Parker 787TC 5000 PSI Compact Spiral Hydraulic Hose

Specifications: SAE J1754, J1942 / ISO 18752-DC / USCG HF / DNV / ABS
Application: Petroleum base hydraulic fluids and lubricating oils
Inner Tube: Proprietary synthetic rubber
Reinforcement: Four spiral steel wire
Cover: Synthetic rubber abrasion resistant, MSHA accepted
Temperature Range: -40°F to +257°F (-40°C to +125°C)
Fittings: 77 series

787TC Compact Spiral Hydraulic Hose Sizes & Specifications

Part No	Inside Diameter		Outside Diameter		Working Pressure		Minimum Bend Radius		Weight		Vacuum Rating		Hose Ends
787TC	in	mm	in	mm	psi	MPa	in	mm	lb/ft	kg/m	in of Hg	kPa	Crimp	Field Attachable
787TC-8	1/2	12,5	0.83	21,1	5000	35,0	3-1/2	90	0.45	0,67	-	-	77	-
787TC-10	5/8	16	0.94	23,9	5000	35,0	4	100	0.54	0,80	-	-	77	-
787TC-12	3/4	19	1.10	27,9	5000	35,0	4-3/4	120	0.78	1,16	-	-	77	-
787TC-16	1	25	1.40	35,7	5000	35,0	6	150	1.17	1,74	-	-	77	-
787TC-20	1-1/4	31,5	1.77	44,9	5000	35,0	8-1/4	210	1.95	2,89	-	-	77	-

IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

787TC Compact Spiral Hydraulic Hose Advantage

EASIER TO WORK WITH:

787TC can be bent to 1/2 the minimum bend radius of SAE 100R13 hose, and requires one third less effort to bend.
787TC’s tight minimum bend radius and smaller outside diameter make it easier to snake through tight spaces.
Because 787TC weighs less, it is easier to manipulate.

SAVES MONEY:

Less 787TC compact spiral hose is required to make a connection whenever a bend is needed because 787TC has a tighter minimum bend radius than SAE 100 R13 hydraulic hose.
Time to install 787TC compact spiral hose is reduced because it is easier to handle and lighter than SAE 100R13 hydraulic hose.
Since 787TC compact spiral hose is lighter, its shipping costs are reduced.
Due to 787TC's lighter weight, the overall weight of any equipment it is installed on is also reduced, which increases its efficiency.
Because it requires less effort to bend, 787TC compact spiral hose increases efficiency of equipment it is installed on, when repeated bending of hoses takes place.
Because it is tested to 2,000,000 impulse cycles (twice the requirement of ISO 18752-DC), 787TC compact spiral hose lasts longer, reducing equipment down-time, and saving on labor cost and cost of replacement hose.

REDUCES RISK OF INJURY:

Because 787TC compact spiral hose is lighter and easier to bend, it requires less effort to handle and consequently reduces the risk of injury to mechanics and maintenance workers.