Hydraulic Hybrid Hoses | Parker Parflex

    hybrid-hose.jpg 

    Parker Parflex Hybrid Hoses are generally constructed with a copolyester tube, one or two-wire reinforcement, and a synthetic rubber cover. These hoses offer superior flexibility and a versatile range of fluid compatibility in medium pressure hydraulic applications. The lightweight, compact design of Parker's hybrid hoses makes them easier to transport, route and work with than comparable rubber hoses.

     

     

    Parker Parflex Hybrid Hose Selection

    D6 - Hybrid Hose

    d6-hose.png
    • Ideally suited for inventory consolidation to cover all SAE 100R1 and many SAE 100R2 pressure requirements
    • Exceeds SAE 100R17
    • MSHA accepted

     

    D6R - Hybrid Hose

    d6r-hybrid-hose.jpg
    • Up to 40% light than comparable rubber hoses
    • Bend radius less than half of conventional SAE 100R1 & 100R2 hoses
    • UV resistant cover
    • 3,000 psi working pressure
    • Long continuous package lengths available

    HFS - Fire-Screen Hybrid Hose

    hfs-firescreen-hybrid-hose.png
    • Excellent flexibility
    • Consistent long lengths
    • Lightweight
    • Compact design
    • Exceeds SAE 100R1
    • SAE J1942 listed for marine applications
    • MSHA accepted

    HFSR - Fire-Screen Hybrid Hose

    hfsr-hybrid-hose.jpg
    • Increased oil, ozone and impulse resistance
    • Up to 40% lighter than comparable rubber hoses
    • UV resistant cover
    • Patented process that bonds the core to the reinforcement to resist kinking and core wash out
    • Long package lengths typical, up to 500 foot
    • Meets/exceeds ISO pressure standards
    • Meets/exceeds SAE J517-100R1

    HFS2 - Fire-Screen II Hybrid Hose

    hfs2-firescreen-ii-hybrid-hose.png
    • Excellent flexibility
    • Consistent long lengths
    • Lightweight
    • Compact design
    • SAE J1942 listed for marine applications
    • Meets/exceeds SAE 100R2 & 100R16
    • MSHA accepted

    HFS2R - Fire-Screen II Hybrid Hose

    hfs2r-hybrid-hose.jpg
    • Excellent flexibility
    • Consistent long lengths
    • Lightweight
    • Compact design
    • Meets/exceeds SAE 100R16
    • MSHA accepted

    HTB - Eliminator Hybrid Hose

    htb-eliminator-hybrid-hose-parker.png
    • Four-spiral wire hose performance in a high tensile two-wire braid construction
    • Excellent flexibility
    • Consistent long lengths
    • SAE J1942 listed for marine applications
    • MSHA accepted

    HTBR - Eliminator Hybrid Hose

    htbr-hybrid-hose.jpg
    • 3500 to 7000 psi working pressure
    • UV & ozone resistant cover
    • Compact O.D.
    • MSHA accepted

    M8 - E-Z FLEX Hybrid Hose

    m8-e-z-flex-hybrid-hose-parker.png
    • Four-spiral wire hose performance in a high tensile two-wire braid construction
    • Excellent flexibility
    • Consistent long lengths
    • Meets/exceeds SAE 100R12
    • MSHA accepted

    HJK - Highjack Jackline Hybrid Hose

    hjk-highjack-jackline-hydrid-hose.png
    • 10,000 psi jack hose
    • Meets I J-100 requirements
    • MSHA accepted
    • For high pressure jackline applications

     

     

    How to Order

     

    IMPORTANT!
    Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

    WARNING: This product can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

     

     

    AVAILABLE HOSE STYLES

    Select from the list below to navigate to a specific category...

    RELATED INFORMATION

    SAFETY: