MSXL Series High Pressure Marine Steering Hose | Parker Parflex

 Parker Parflex MSXL High Pressure Marine Steering Hose

MSXL Series High Pressure Marine Steering Hose

  • Fast, accurate response in marine steering systems
  • Low volumetric expansion
  • Corrosion resistant aramid fiber reinforcement
  • Abrasion resistant polyurethane jacket suitable for salt water or fresh water environments

Application:  Marine hydraulic steering systems
Inner Tube:   Nylon
Reinforcement:   Aramid fiber
Cover:   Polyurethane
Temperature Range:  -40°F to +185°F (-40°C to +85°C)
Vacuum Rating:   28 inch Hg
Crimp Fittings:  MS
Field Attachable Fittings: Do not use

Sizes and specifications

Part
Number

Nominal
I.D.

Maximum
O.D.

Maximum Working Pressure 73˚F/ 23˚C

Minimum
Bend
Radius

Vac.
Rating
Hg./73˚F

Weight

Permanent
Fitting
Series

  MSXL

inch

mm

inch

mm

psi

MPa

inch

mm

inch

lbs./ft.

kg./mtr.

 

MSXL-5

5/16

8

.50

13

1,500

10.3

2.25

57

28

.05

.07

MS

Notes:

  • MS Series Permanent Crimp Fittings only
  • Non-perforated cover
  • Obtional HBR (Hose Bend Restrictor) available for Marine Steering Hose Assemblies

IMPORTANT!
Hose and hose fittings series must be correctly matched. Using any fittings other than those specifically designated by the hose manufacturer for use with each specific hose can lead to hose assembly failure. Hose assembly failures have lead to damage, injury and death.

Crimping instructions for hose assembly fabrication using Parker crimpers


California Prop 65 Warning WARNING: These products can expose you to chemicals including lead and/or DEHP and/or carbon black, which are known to the State of California to cause cancer or birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov