Chemical Industrial Hoses | Parker | TITANFLEX® UHMWPE Chemical Hose | SWC693 Series


Series SWC693 is an extremely flexible, high pressure, high temperature suction and discharge hose designed to handle approximately 98% of commonly used acids, chemicals and solvents as well as food, pharmaceutical and sanitary materials. The hose is manufactured using polished stainless steel mandrels for an ultra-smooth tube that will not impart taste or odor. The ultra high molecular weight polyethylene (UHMWPE) tube meets FDA, USDA and 3-A requirements and will not leach into and contaminate the product being conveyed. The lightweight corrugated hose construction incorporates a dual wire helix that provides full suction capability, superior kink resistance, minimal force-to bend and a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, mild chemicals and ozone.

 

TUBE Translucent ultra high molecular weight polyethylene (UHMWPE)
REINFORCEMENT Multiple textile plies with dual wire helix
COVER Green EPDM; corrugated wrapped finish
TEMPERATURE RANGE

-40°F to 180°F (-40°C to 82°C)

(Note: The maximum temperature for Parker's chemical hose with UHMWPE has been reduced from 250°F to 180°F. This change is effective immediately and is a safety measure to avoid misapplications with chemical hose at high temperatures.)

DESIGN FACTOR 4:1
INDUSTRY STANDARDS FDA, USDA, 3-A
APPLICATIONS
  • Non-fatty and non-oily foods and liquids, potable water, sanitaryproducts
  • Acids, chemicals, solvents
  • In-plant and tank transfer, delivery, transport
VACUUM Full
PACKAGING Coils




Part Number

ID

Reinf
Plies

OD

Min Bend Rad

Max Rec WP

Perm Cplg Rec

in

in

in

psi

SWC693-1000

1

2

1.375

1.0

250

HAPS

SWC693-1250

1-1/4

2

1.625

1.3

250

*

SWC693-1500

1-1/2

2

1.875

1.5

250

HAPS

SWC693-2000

2

2

2.438

2.0

250

HAPS

SWC693-3000

3

2

3.438

4.5

200

*

SWC693-4000

4

2

4.500

8.0

200

*

*Couplings: Refer to CrimpSource at www.safehose.com for coupling recommendations and crimp specifications.

WARNING!

  • It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose compounds to withstand them. Contact Parker for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature.
  • At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
  • „Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube.

 

 

How to Order