Polyethylene Tubing | Parker Series E | Metric Sizes

Instrument Grade – FDA, NSF Listed

 Parker Polyethylene Tubing Metric E Series

FEATURES:

  • Made from 100% virgin resin material
  • Chemically resistant and flexible
  • High molecular weight resin provides increased dimensional stability, uniformity and long-term strength
  • Economical system solution

CERTIFICATIONS:

  • FDA compliant for food contact
  • ASTM D-1693 (10% IGEPAL) for stress crack resistance
  • NSF-51
  • NSF-61

Sizes and Specifications


Part Number

(Natural)

Tube O.D. (mm) Tube I.D. (mm) Average Wall Thickness (mm) Working Pressure (psi, at 73°F/23°C) Minimum Burst (psi, at 73°F/23°C)

Minimum Bend Radius (mm)

E-6X1-0100 6 4 1.00 125 500 25
E-8X1-0100 8 6 1.00 100 400 38
E-10X1.5-0100 10 7 1.50 125 500 38
E-12X1.5-0100 12 9 1.50 100 400 63

Standard black is not NSF approved.


Maximum Working Pressure (bar)
tubing-parker-e-series-metric-pressure-rating.png
 

Notes


  • E Series natural and colored tubing meet FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
  • Resistant to environmental stress cracking exceeding that of ordinary polyethylene tubing as measured by ASTM D-1693 (10% IGEPAL)
  • All tubing conforms to ASTM D-1248, Type I, Class A, Category 4, Grade E5
  • The recommended operating temperature range for service at rated pressures with compatible fluids is -80°F to 150°F (-62°C to 66°C)

Use with The Following Parker Fittnigs

  • Metru-Lok™
  • Flow Control
  • Prestolok Brass
  • Prestolok Composite
  • Presomatic

A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. See compatibility chart for plastic tubing with fittings.

 

How to Order