Polyethylene Tubing | Parker Series E | Metric Sizes
Instrument Grade – FDA, NSF Listed
FEATURES:
CERTIFICATIONS:
|
Sizes and Specifications
Part Number (Natural) |
Tube O.D. (mm) | Tube I.D. (mm) | Average Wall Thickness (mm) | Working Pressure (psi, at 73°F/23°C) | Minimum Burst (psi, at 73°F/23°C) |
Minimum Bend Radius (mm) |
E-6X1-0100 | 6 | 4 | 1.00 | 125 | 500 | 25 |
E-8X1-0100 | 8 | 6 | 1.00 | 100 | 400 | 38 |
E-10X1.5-0100 | 10 | 7 | 1.50 | 125 | 500 | 38 |
E-12X1.5-0100 | 12 | 9 | 1.50 | 100 | 400 | 63 |
Standard black is not NSF approved.
Maximum Working Pressure (bar) |
Notes
- E Series natural and colored tubing meet FDA, NSF-51 requirements for food contact applications and NSF-61 for potable water
- Resistant to environmental stress cracking exceeding that of ordinary polyethylene tubing as measured by ASTM D-1693 (10% IGEPAL)
- All tubing conforms to ASTM D-1248, Type I, Class A, Category 4, Grade E5
- The recommended operating temperature range for service at rated pressures with compatible fluids is -80°F to 150°F (-62°C to 66°C)
Use with The Following Parker Fittnigs
- Metru-Lok™
- Flow Control
- Prestolok Brass
- Prestolok Composite
- Presomatic
A tube support should be used with this tubing for maximum holding power where end loading, vibration or pressure spikes may occur. See compatibility chart for plastic tubing with fittings.